|Appearance:||Milky White||Solid Content:||50±1|
|PH (25℃):||7.5-8.5||Tg (℃):||+75|
|MFFT (℃):||75||Package:||200kg & 1000KG IBC|
Non Film Forming Acrylic Emulsion,
Corrugated Boxes Forming Acrylic Emulsion,
Joncryl 631 Non Acrylic Resin
WQ-2031 Water Based Acrylic Emulsion
Replace Joncryl 631 Non-Film Forming Acrylic Emulsion For Corrugated Boxes
WQ-2031 is a high performance hard non-film forming styrene-acrylic copolymer emulsion, with high hiding, specially formulated for water based printing inks. Its particle distribution is uniform and fine, with excellent covering performance, strong adhesion, good color development to pigments, and good printability; it is especially suitable for flexo and gravure printing.
|Appearance||Translucent milky emulsion|
|Solid content (%)||50±1|
|Viscosity at 25℃,cps(Brookfield, LVT No.4,60 RPM )||1600-2500|
|Water Based Felxo Varnish for corrugated boxes & kraft paper -High cost performance|
|①||WQ-2031 (Non-film forming)||51.50|
|③||WQ-2021(acrylic resin solution)||15.00|
|⑥||Aerosol® OT-75 Leveling agent||1.00||Cytec|
|⑦||Defoamer : Ethanol (1:1) *||0.50||MÜNZING AGITAN® 351|
1. Premix ( ①＋②＋③), then add ④＋⑤+⑥, add the above materials and stir at the same time, at a constant speed, finally add ⑦, stirring time: about 30 minutes/300 rpm.
2. 4#cup: 25 seconds ± 5
PH value: 8.20 ± 0.5%
3. AGITAN® 351 Defoamer diluted with Ethanol =1:1 (Adjust the amount as per needs)
4. Special notes: Please do not use rosin oil and rosin pigment paste, because they are incompatible with our products. We recommend using water-based acrylic pigment paste.
The product should be stored in a closed container and avoid freezing and high temperature, Suggested normal storage temperature is 10 to 35℃.
200KG/Drum, 1000KG IBC