Appearance: | White Powder | Solid Content(%): | 100 |
---|---|---|---|
Softening Point(℃): | 140 | Acid Value(mgKOH/g): | 4 |
Tg(℃): | 50 | Viscosiy(mpa.s): | 2000 - 4000 (51% In Toluene) |
High Light: | PARALOID B-66 Replace Acrylic Resin Powder,100 Solid Acrylic Resin Powder,PARALOID B-66 Replace Solid Acrylic Resin |
SA-166 Solid Acrylic Resin Replace PARALOID B-66 For Aerosols And Inks
Recommendation:
The physical properties and performance of SA-166 are very close to PARALOID B-66, so we often recommend our customers to use SA-166 to replace PARALOID B-66.
SA-166 solid thermoplastic acrylic resin is an excellent general purpose resin, it forms a clear solution in a suitable solvent, has good CAB compatibility, very fast air drying, its coating film is hard, colorless, high gloss, excellent chemical resistance, corrosion resistance, good pigment dispersion
SA-166 is very suitable for the following substrates and applications: plastics, concrete floors, gravure inks, transparent aerosols, ABS, polycarbonate, polystyrene coatings, container coatings
Translated with www.DeepL.com/Translator (free version)
Physical charateristics
Appearance White powder
Solid Content (%) 100
Softening Point (℃) 140
Acid Value (mgKOH/g) 4
Tg (℃) 50
Viscosity (mpa.s) 2000 - 4000 (51% in toluene)
Solvent:
Based on our experience and recommendations, this product is soluble in esters, ketones and aromatics.
But it is insoluble in y200# gasoline and alcohol.
Application:
25kg in each bag
Storage:
Store in its original packing at the place where is dry and installed with ventilation equipment.