|Type Of Polymer:||Brown Viscous Liquid||Viscosity(mPa.s):||≥5000|
|Physical State:||Liquid||Solid Content:||73±2%|
WL-186 Water Based Acrylic Modified Epoxy Resin
Water-based acrylic modified epoxy resin, co-solvent, neutralizer.
|Apperance||Brown viscous liquid|
|pH(1:1 dilution with water)||8.0-1.0|
Fast drying speed, fast growth of hardness, high hardness, good initial water resistance, good gloss and salt spray resistance.
Excellent shear stability, helps the pigment wetting, can directly participate in the grinding of the color paste, it is recommended to add a small amount of high boiling point solvents such as ethylene glycol butyl ether during grinding to increase the stability of the system
It is recommended to use about 1 times the amount of water to dilute the resin, and then it can be diluted with water indefinitely; if the resin is diluted with more than 1.5 times of water at one time, compatibility problems are likely to occur.
The pH value of the system is stable at 8.5-9.5, and it will settle and layer under acidic conditions, so pay special attention when adding acidic pigments.
This is mainly used for anti-corrosion and rust prevention and decoration of metal surfaces, including auto parts, frame and axles, gearboxes, brake pads, drive shafts, vehicle chassis parts, motors, steel structures, steel cylinders, water pumps, engineering machinery, hardware tools , Containers, railway locomotives, agricultural machinery, elevator parts, petroleum pipelines, transformers, radiators, valves and other metal products such as primer, topcoat and primer and top coat all-in-one paint.
Store in a cool and ventilated place, keep the container tightly, storage temperature is 0-40 ℃, shelf life is 12 months.
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.