|Package:||1000kg Or 200kg|
Milkywhite Water Resistant Acrylic Emulsion,
Flexo Plastic Varnish Acrylic Emulsion,
Joncryl 624 Water Based Acrylic Resin
Water Resistance Acrylic Emulsion Counterpart To Joncryl 624 For Flexo Plastic Varnish
WQ-2015 acrylic emulsion has excellent water and rub resistance and film wetting and good ddhesion to lots of substrates. It is specially designed for flexo & gravure plastic inks and overprint varnishes. It promotes gloss, holdout, and resolubility in printing ink and overprint varnish formulations and can also be used to produce inorganic and organic pigment dispersion.
It is recommended to use WQ-2015 water based acrylic emulsion and WQ-2011 non-filming acrylic emulslion for water based flxography plastic varnish. The final inks will have excellent water resistance and rub resistance.
|Solid Content (%)||49±1|
Rerefence Formulation For Water Based Varnish For Plastic Substrate (Flexography)
|②||WQ-2011 (non-film forming)||19.00|
|③||WQ-2028 (improving gloss)||5.50|
|⑤||DOWSIL™ 51 : Ethanol (1:1) *||1.00||Dow Corning|
|⑥||Defoamer||0.50||TEGO Foamex 825|
Add the above materials and stir at the same time, at a constant speed, stirring time: about 30 minutes/300 rpm.
2. *: DOWSIL™ 51 Additive diluted with Ethanol =1:1
3. 4# cup: 25 seconds ± 2
PH value: 8.20 ± 0.5%
4. Final inks: varnish 70%+pigment paste 30% =100 (Ajusting it accoring to needs)
The product should be stored in a closed container to avoid freezing and high temperature. Suggested normal storage temperature is 10 to 35℃.
200kg small mouth plastic drum
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.