|Non-Volatile Matters (GB/T 1725:||77±2%||Appearance:||Brown -yellow Transparent Viscous Liquid|
|Viscosity(mPa.s):||<200 MPa.s（Rotary Viscometer）||PH Value:||7.0-9.0 （pH Meter）|
|Air Dry:||Applicable（Oxidation Cross-linking）||Fineness:||<35|
Water Based Modified Alkyd Resin,
Acrylic Modified Alkyd Resin,
Paint Modified Alkyd Resin
WL-380-11 Water Based High Non-Volatile Acrylic Modified Alkyd Resin For Decorative Paint
Acrylic dispersions were mixed with alkyd emulsions to obtain coatings that lower the amount of volatile organic compounds (VOC) in surface coatings. The advantage of this approach is that the fast drying of the acrylic is combined with the good film properties of the alkyd. Films produced with an alkyd and a soft acrylic (AA1) did not exhibit good film properties.
With excellent coverage, hiding power, and durability their superior levelling properties provide a smooth, streak-free, finish that withstands frequent washing and resists chipping and abrasion. WL-380-11 has high fullness,it is applied to make various of decorative paint for wood and surface of metal.
|Composition||water based acrylic modified alkyd resin, cosolvent, neutralizer||--|
|Appearance||brown -yellow transparent viscous liquid||visual|
|Non volatile||77±2%||30min@120 ℃|
|PH value||7.0-9.0||PH meter|
|Viscosity(25℃,0mpa.s , rotational viscometer)||≤200||NDJ-79 rotary viscometer (1:1pm dilution, 25 ℃)|
(1) It can be diluted with water, and water-based drier can be oxidized and cross-linked to dry at room temperature, or it can be baked at low temperature to promote its drying. Some dry materials have reverse roughness when being added. You can add a neutralizer to the dry materials in advance, and then add them.
(2) It has excellent anti-corrosion performance and drying time. It is specially designed for the preparation of anti-rust primer and bottom-in-one paint. It can be made into self-drying and low-temperature baking anti-rust paint. The paint film has excellent drying properties. , Anti-corrosion performance and certain anti-aging performance.
(3) Deionized water should be used for dilution. Pay attention to the pH value of the system when diluting. Acidic or hetero-ionized water will destroy the stability of the system. N,N-dimethylethanolamine or triethylamine can be added to adjust the pH of the emulsion. The pH-adjusted emulsion has good storage stability. Clean tap water can also be used after testing.
Packaging and Storage Condition
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.