Appearance: | Milky White Emulsion | Solid Content: | 40±1% |
---|---|---|---|
Vicosity At 25℃ , Cps(Brookfeld, LVT No.4,64 RPM): | 800-2500mps | Ph Value: | 8.0 |
Density (g/l): | 1.02-1.05 | Acid Number: | 76 |
Tg (℃): | +110 | MFFT (℃): | >90 |
High Light: | Flexographic Printing Ink Acrylic Emulsion Polymer,Induprint SE90 Acrylic Emulsion Polymer,2500mps Water Based Acrylic Resin |
WQ-290 Water Based Acrylic Emulsion
Introduction
WQ-290 can be as the counterpart To Induprint SE90 and Joncryl 90. WQ-290 acrylic emlsion is a non-film forming hard styrene-acrylic copolymer emulsion specially formulated for waterborne overcoat varnishes and printing inks. The varnish formulated with this product has fast drying speed and high gloss, excellent water resistance and anti-stick back performance, and it has good compatibility with popular acrylic polymers on the market.
Since this product cannot form a film by itself, it must be used with a suitable film-forming additive or mixed with a film-forming acrylic emulsion with a smaller particle size. In addition, this product has good pigment wetting in flexo and gravure inks ability.
WQ-290 has low cost and high heat resistance and excellent gloss and it is used for water-based overprint varnishes and water-based flexographic and gravure-printing inks.
Physical Property
Appearance | Translucent milky emulsion |
Solid content (%) | 40±1 |
Viscosity (mPa.s) | 1500-2500 |
Acid value | 75 |
pH value | 8.0-9.0 |
Density(g/l) | 1.02-1.05 |
MFFT (℃) | >90 |
Tg(℃) | +110 |
Performance
Application
Storage
The product should be stored in a closed container and avoid freezing and high temperature, Suggested normal storage temperature is 10 to 35℃.
Packing
200KG/Drum.
Special Tips
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.