Mirror Chrome Effect Ink Screen Printing For PC PMMA PVC PET

Mirror Chrome inks paint resin for glass

Mirror chrome ink is a solvent-based ink with special effects. The ink is printed on the transparent material on the reverse side to obtain a mirror/chrome effect on the front side. Used for screen printing on transparent sheets including PC (polycarbonate), PMMA (acrylic or plexiglass), rigid PVC (polyvinyl chloride) and treated PET (polyester), glass, etc.

The mirror chrome ink provide mirror/chrome effect by spray on the back side of glass, plastic. Mirro chrome ink is a unique ink that is applied to the reverse side of glass or tempered glass to create a reflective mirror like finish. This mirror-like printing ink, suitable for the glass and tempered glass ,high performance in the boiling water test. 

1. Sprayed on primer black polyurethane and activator
2. Then sprayed with a light coat of liquid chrome ink
3. Apply a clear coating(varnish) of liquid chrome to make it shine

Instructions

• To obtain the most great chrome effect, liquid chrome paint must be applied to a smooth black surface that is coated with a black ink.
• Wipe the area to be coated with industrial alcohol or lacquer thinner/solvent to remove any residual grease, wax or oil residue, being careful to avoid scratching the surface. For best results, the surface must remain scratch-free and smooth like glass.
• Stir and pour the Body Chrome Ink into the gun or gun cup. NOTE: No additional dilution is required or needed. Adjust the gun to a very light material flow and spray 3 or 4 very light coats, stopping as soon as full opacity is achieved.
• Spray two-part polyurethane clear varnish and polish to a smooth, perfectly flat surface.
•  

Charasteristic

• High mirror/chrome effect
• Strong adhesion,
• High temperature resistance and
• High humidity resistance

Storage

• Use in a well-ventilated area.